The Aten VS0201 is a remarkable two-port VGA and audio switch. It comes with a built-in bi-directional RS-232 serial port, enabling high-end system control through advanced RS-232 commands. This allows secondary systems to control functions like port switching, auto-switching, front panel pushbutton lock, and power-on detection. Key features include displaying two computers' video output on one monitor or projector. You can quickly and easily switch between VGA/audio sources using front panel pushbuttons, RS-232, or an IR remote control. It offers superior video quality up to 1920 x 1440 and long-distance transmission up to 65 m. It supports various monitor types such as VGA, SVGA, UXGA, WUXGA, and multisync monitors. Its Video DynaSync technology, exclusive to ATEN, eliminates boot-up display issues and optimizes resolution during port switching. It supports stereo audio, is DDC compatible, and has a 300MHz bandwidth for optimal video quality. With LED indication of power status and source device, an all-metal casing for durability, and a plug-and-play design that requires no software installation. Technical specifications: Video input has 2 x HDB-15 Male (Blue) interfaces with 75 impedance and a max distance of 1.8 m. Video output has 1 x HDB-15 Female (Blue) interface with 75 impedance and a max distance of 30 m. Max bandwidth is 300 MHz, max resolution is up to 1920 x 1440, and max distance is up to 30 m. Audio input has 2 x Mini Stereo Jack Female (Green), and output has 1 x Mini Stereo Jack Female (Green). Control uses RS-232 with a 1 x DB-9 Female (Black) connector, specific baud rate and protocol. IR has 1 x Mini Stereo Jack Female (Black). Power uses 1 x DC Jack with a consumption of 5.3 VDC, 0.55W. Operating temperature is 0 - 50°C, storage temperature is -20 - 60°C, and humidity is 0 - 80% RH, non-condensing. It has a metal housing, weighs 0.45 kg (0.99 lb), and has dimensions of 13.00 x 7.61 x 4.40 cm (5.12 x 3 x 1.73 in.), with a carton lot of 5 pcs.
Using the Aten VS0201 is a breeze. First, connect your computers to the VGA and audio inputs. The VGA inputs are the 2 x HDB-15 Male (Blue) connectors, and the audio inputs are the 2 x Mini Stereo Jack Female (Green) connectors. Then, connect the monitor or projector to the VGA output (1 x HDB-15 Female (Blue)) and the audio output (1 x Mini Stereo Jack Female (Green)). You can switch between the two sources in three ways. You can use the front panel pushbuttons for quick and easy switching. If you prefer remote control, use the IR remote control. Or, for high-end system control, use the RS-232 connection with the 1 x DB-9 Female (Black) connector. When using the RS-232 control, make sure to set the correct baud rate (19200), data bits (8), stop bits (1), and no parity or flow control. For power, connect the device using the 1 x DC Jack, and it consumes 5.3 VDC, 0.55W. As for maintenance, keep the device in a clean and dry environment. The operating temperature should be between 0 - 50°C, and the storage temperature between -20 - 60°C. The humidity should be 0 - 80% RH, non-condensing. Avoid exposing the device to extreme conditions. The all-metal casing provides durability, but still handle it with care. If you encounter any boot-up display problems, the Video DynaSync technology should help optimize the resolution. And remember, it's a plug-and-play device, so no software installation is required.
