Bittree B96DC-HNALH/E3 2 x 48 Front Programmable Audio TT Patchbay

The Bittree B96DC - HNALH/E3 is a remarkable 2x48 front programmable audio TT patchbay. It belongs to the 969 - A Series of front programmable TT (Bantam) audio patchbays, with a 1.5RU height and an E3 rear interface. This patchbay features half - normalled and looped grounding. Key features include a high - density 2x48 jack configuration with mono (even) jack spacing. You can easily change circuits via shunts under both designation strips. It uses digital AES wire for internal wiring. The front panel has 1 - 48 left - to - right numbering for simple circuit identification. It comes with 2 x DS800 - 10 designation strips in 'Over/Under' orientation. Mating hardware is included for E3, E90, and ID (Punchdown) rear interfaces, and a 6' (15.24 cm) deep rear lacing bar is provided with E3 and ID (Punchdown) rear interfaces.

Using this Bittree patchbay is quite straightforward. First, identify the circuits easily thanks to the 1 - 48 numbering on the front panel. If you need to change the circuits, just use the shunts under the designation strips. When connecting, make sure to use the included mating hardware for the E3, E90, or ID (Punchdown) rear interfaces. As for the rear lacing bar, it's there to help you organize your wires neatly. When it comes to maintenance, keep it in a clean and dry environment. Check the internal wiring regularly to ensure the digital AES wire is in good condition. Avoid exposing it to extreme temperatures or humidity, as this could affect its performance. And always follow the standard safety procedures when handling electrical equipment.