TASCAM's DR-10X is a super-compact recorder that easily attaches to a handheld microphone, making it the ideal choice for on - the - go news gathering. Its captive XLR connector securely fastens to your mic, allowing you to capture high - quality interviews at 48kHz/24 - bit Broadcast WAV resolution. You can offload recordings either via the microUSB connection or by simply removing the microSD card.
This recorder comes with both manual and automatic gain settings. It also features a low - cut filter and limiter to avoid audio overloads. The Dual Recording mode is a great safety net, creating a lower - level copy of the audio in case of distortion. To start recording right away, just hold the record side switch while turning on the unit.
Key Features:
- XLR plug - on connection for stable attachment
- Compatible with dynamic and battery - powered condenser mics
- 48kHz/24 - bit linear PCM mono recording for crisp audio
- WAV files, compatible with BWF format
- Supports microSD/SDHC cards up to 32GB
- Sliding record switch with hold function to prevent accidental mistakes
- Dual recording for backup
- Automatic file closing to protect your recorded data
- XLR connector can serve as an external input
- Adjustable high/mid/low recording levels
- Low - cut filter and limiter for audio quality
- Automatic level function for ease of use
- Built - in clock for BWF files with time info, aiding in editing and searching
- Time track incrementing to create new files every 15 minutes
- Playback function to check recordings instantly
- Headphone output for private listening
- Locking mechanism for a tight mic connection
- Easy - to - read organic EL display
- Micro USB B port for seamless computer data exchange
- Runs for at least 10 hours on a single AAA alkaline battery (EVOLTA)
- Unit settings can be transferred as a text file
- Infrared transmission for sharing settings between multiple units
- Firmware updatable via microSD card
- RoHS - compliant for environmental safety
Technical Specifications:
- Recording Media: microSD (64MB - 2GB), microSDHC (4GB - 32GB)
- Media Discharging: Push - Push type with guard cover
- Recording Format: WAV (BWF), 48kHz sampling, 24 - bit quantization
- Channels: 1 - channel (Mono)
- Analog Audio INPUTS: XLR - 3 - 31 connector, 10k ohm or more input impedance, LOW/MID/HIGH MIC input gain
- PHONES: 3.5mm (1/8') stereo mini jack (DUAL MONO)
- USB: Micro - B type 4pin, USB2.0 HIGH SPEED mass storage class
- Power: 1 AAA battery (Alkaline or NiMH) or USB bus power
- Battery Operation Time: About 10 hours with alkaline batteries (EVOLTA)
- Battery (RTC): Lithium × 1 (built - in)
- Dimensions: 52(W) × 94.4(H) × 28(D) mm
- Weight: 68.3g (with batteries), 56.3g (without batteries)
- Accessories: USB cable, Owner's Manual (including warranty)
Using the Tascam DR - 10X is a breeze. First, attach it to your handheld microphone using the XLR plug - on connection. Make sure it's firmly locked in place with the locking mechanism. Then, insert a compatible microSD or microSDHC card into the media slot. You can choose the recording level settings (high, mid, or low) according to your needs. If you're not sure about the audio levels, you can use the automatic level function.
To start recording, turn on the unit while holding the record side switch. You can use the sliding record switch during recording, and don't worry about accidental misoperation thanks to the hold function. The Dual Recording mode is really useful. It records a backup copy at a lower level, so if there's any distortion in the main recording, you still have a usable backup.
After recording, you can check your recordings right away using the playback function with a pair of headphones plugged into the 3.5mm stereo mini jack. To transfer the recordings to your computer, you can either use the microUSB B port or simply remove the microSD card.
Here are some important notes. When using the batteries, make sure to insert them correctly. The unit can run on a single AAA alkaline or NiMH battery, and it can also be powered by USB bus power. If you use an alkaline battery (EVOLTA), it should last about 10 hours. Also, be careful when handling the media card. The media discharging is a push - push type with a guard cover, so don't force it.
For maintenance, keep the unit clean and dry. If you need to update the firmware, you can do it easily using a microSD card. And you can share the unit settings between multiple DR - 10X units using the infrared transmission function. Just follow the instructions in the owner's manual for a smooth experience.
