The TritonAudio BigAmp Piezo is a top - notch, compact JFET instrument preamp that works great both on stage and in the studio. It features a 1/4' female jack input. Its low - noise Class A amplifier offers high - end amplification and turns the unbalanced instrument output signal into a balanced one. Piezo transducers usually have an impedance of several Mega Ohms, much higher than the high - Z input of preamps or consoles. This can limit the output signal and transient response. Also, the high impedance and cable capacity form a low - pass filter, making the sound dull. The BigAmp Piezo is designed to solve these problems. With a 7.5 Mega Ohms input impedance, it lets the piezo transducer reach its full potential. It has a low 3dB signal amplification for maximum headroom. Its small size allows it to be connected close to the transducer, reducing cable capacitance. You can take this high - quality DI anywhere. It runs on 24v/48v phantom power, so no need to worry about batteries. Every touring musician should have a BigAmp in their gear. Key features include 7.5MOhm input impedance, a low - noise Class A JFET amplifier, 24 - 48 v phantom power, 3dB amplification, and a balanced output.
Using the TritonAudio BigAmp Piezo is easy. First, connect it as close as possible to your piezo transducer to minimize cable capacitance. Then, use the 1/4' female jack input to connect your instrument. Make sure to power it with 24v or 48v phantom power. You'll notice an improved sound right away. As for maintenance, keep it clean and dry. Avoid exposing it to extreme temperatures or humidity. When not in use, store it in a safe place. Also, check the power source regularly to ensure it's providing the correct voltage. With proper use and care, your BigAmp Piezo will serve you well for a long time.
