Appsys ADS-8 Active ADAT/Toslink-Splitter and Repeater

The Appsys ADS-8 Active ADAT/Toslink Splitter and Repeater is a game - changer in audio signal management. It lets you easily connect a single signal source to two different destinations. Unlike traditional passive splitters that weaken the signal by halving the light on each output, the ADS - 8's active design receives the optical signal, converts it to an electrical one, and splits it without any loss. Each output transmitter operates at full power. It also acts as a signal repeater, doubling the reach of your optical connections. Key features include reliable and lossless signal splitting, extended transmission distance from 5 - 10m to 10 - 20m (depending on equipment), near - zero latency, all input channels available on both outputs, compatibility with all TOSLINK - supported audio formats, and it's a high - quality product made in Switzerland. Technical specs: optical connector (F05 Type TOSLINK - compatible), supports ADAT, SPDIF, Dolby Digital 5.1 and other TOSLINK formats (up to 96 kHz sample rate/15 Mbit data rate), and requires a 9 - 12VDC 50mA power supply with a 2.5mm ID, 5mm OD, 9mm length plug and center - positive polarity.

Using the Appsys ADS - 8 is easy. First, connect your signal source to the input of the splitter using a compatible TOSLINK cable. Then, connect two output devices to the two output ports with TOSLINK cables as well. Plug in the power supply with the correct voltage and polarity. You're all set to enjoy your audio on two devices simultaneously. When handling the splitter, be gentle with the optical connectors to avoid damage. Keep it in a dry and cool place. For maintenance, you can use a soft, dry cloth to clean the exterior. If you're not using it for a long time, unplug the power supply to save energy. That's all you need to know to make the most of your Appsys ADS - 8.