The Datavideo RMK-1 1U Rackmount Kit is a great solution for mounting one or two half-rack width Datavideo products. It comes with all the necessary parts for easy installation. The kit includes 2 rack ears, 1 upper connection plate, 1 lower connection plate, 1 half-length front block plate, 4 M3x4mm black screws for the lower connection plate, 4 M4x8mm black screws for the rack ear, 2 M3x6mm nickel-plated screws for the upper connection plate, 1 manual/QSG, and 1 thank you card.
Using the Datavideo RMK - 1 1U Rackmount Kit is quite easy. First, gather all the parts from the box including the rack ears, connection plates, and screws. Attach the rack ears to your rack using the M4x8mm black screws. Then, use the appropriate screws to connect the upper and lower connection plates to your Datavideo products. Finally, put the half - length front block plate in place. When installing, make sure the screws are tightened properly but don't over - tighten as it might damage the parts. For maintenance, keep the kit in a dry place. If it gets dirty, you can use a soft, dry cloth to clean it. Refer to the manual/QSG for more detailed instructions if you encounter any problems.
