The DigitaLinx DL - HD70LS is an outstanding extender set that can transmit high - quality HDMI signals, including 1080p, 4Kx2K (UHD), and 3D, along with HDCP 2.2 support. It also enables bidirectional IR transmission up to 70 meters using just a single solid - core, shielded Category 5e twisted - pair cable. With built - in surge protection, installations are worry - free and reliable. The 12 - volt power supply comes with a screw - on connector to prevent accidental disconnection. This set includes a transmitter, a receiver, a power supply, and an IR flasher/emitter. It's compatible with 1080p, 4Kx2K, and 3D, and supports CEC. It's HDCP 2.2 compliant and has bidirectional wideband IR. The power from the transmitter supplies the receiver. The locking power connector comes with the power supply. In terms of technical specs, it has various I/O connections, supports a wide range of audio and video formats, and meets strict HDBaseT signal characteristics.
Using the DigitaLinx DL - HD70LS set is quite easy. First, connect the HDMI source to the transmitter's HDMI port. Then, use a solid - core shielded Category 5e or better cable to link the transmitter and the receiver. Plug in the power supply to the transmitter, and it will also power the receiver. Connect your display device to the receiver's HDMI port. For IR control, connect the IR devices to the appropriate IR input and output ports. When installing, make sure to place the devices in a stable environment. Avoid areas with high humidity or strong electrical interference. Keep the power connector tightly screwed on to prevent power disconnection. For maintenance, regularly check the cables for any signs of damage. If you find any issues with the signal quality, try re - plugging the cables or check the power supply. Clean the devices with a soft, dry cloth.
