Product Description
The DigitaLinx EDU-4HUAC-4K-035 ARK Series 3-piece room kit is a powerful solution for your HDMI and USB needs. It includes an input plate, a control plate, and a receiver/processor with an audio amp. This kit supports up to 4K scaling, has USB connectivity, a WebGUI for easy setup, and remote monitoring capabilities. Key features include 4 HDMI inputs (with the 4th on the receiver), USB-B 2.0 high-speed connection, and separate pass-through audio. It has an HDBaseT output that can reach up to 70m to the receiver unit, and is HDCP2.2 compliant. The receiver also offers an HDMI input for local devices. With 4K scaling on HDBT in and HDMI out, a 70v / 8ohm amp line, mic input with selectable phantom power, audio out, a USB2.0 high-speed 3-port hub, HDMI out, and 2 LAN ports, it's a versatile option. It also has a mute relay, RS232 port, and an IR port, and the system can be programmed. The web-based remote monitoring software allows you to view and control the system from anywhere on the LAN, and it offers remote configuration for easier setup. The WEB-based GUI enables local device setup and configuration, and full control from any browser device when in user mode. It's UL listed for safety. The kit includes a Digitalinx 'ARK' Series Three Piece HDMI & USB Room Kit, various cables such as LAN, HDBaseT, HDMI, USB, and audio cables.
Using the DigitaLinx EDU-4HUAC-4K-035 ARK Series room kit is quite straightforward. First, connect the input plate, control plate, and receiver/processor as per the included instructions. Connect your devices to the appropriate HDMI and USB ports. You can use the WebGUI to set up and configure the system. It can be done locally or remotely using the web-based remote monitoring software. When using the audio features, make sure to adjust the volume and other settings according to your needs. For the mic input, you can select the phantom power if required. When it comes to maintenance, keep the kit clean and free from dust. Check the cables regularly for any signs of damage. If you need to update the system, use the programming feature to make the necessary changes. Always ensure that the system is properly grounded for safety. If you encounter any issues, refer to the troubleshooting section in the user manual or contact customer support.
