Intelix AS-2H Dual HDMI Auto-Switcher with HDMI and HDBaseT Output

The Intelix AS - 2H is an under - table - mounted automatic switching device. It's the ideal primary PC interface for classrooms, boardrooms, and conference centers. With two HDMI inputs, it can smoothly handle multiple video sources. This device uses HDBaseT technology. You can extend the digital output up to 70 meters away using a solid - core shielded Category 5e or better cable. It's compatible with several Intelix HDBaseT receivers, especially the DIGI - HD60C - R. Multiple EDID modes are featured to avoid user confusion and issues with incompatible video formats. There's an HDMI output, and when both inputs are active, it'll select the 'last in'. The rear of the unit has additional contact closure inputs for third - party control. You can control the AS - 2H via RS232 by connecting to the RS232 port on a compatible receiver like the DIGI - HD60C - R or directly to the RS232 input of the device. What's more, the AS - 2H can be programmed to control the connected display. Use the Intelix Display Control software to enter the display manufacturer’s RS232 commands. This enables automatic control of display power and input based on video activity, often eliminating the need for a third - party control system. Key Features: - Two HDMI inputs - HDMI and HDBaseT output with a maximum distance of 70m - Automatically switches to the active video input - RS232, Auto, and Dry Contact Closure for device control - PoH (Power over HDBaseT) or 24V DC local power - Display Control Software to control TV or projector via RS232 commands and automatically turn the display on/off - Customizable power management system when not in use

Using the Intelix AS - 2H is quite easy. First, connect your video sources to the two HDMI inputs. If you want to extend the output, use a solid - core shielded Category 5e or better cable for HDBaseT output, which can reach up to 70 meters away. Connect the device to a compatible receiver like the DIGI - HD60C - R if you plan to use RS232 control. When both inputs are active, the device will automatically select the 'last in' input. You can also use the contact closure inputs on the rear for third - party control. To control the connected display, use the Intelix Display Control software. Just enter the display manufacturer’s RS232 commands, and the display's power and input will be automatically adjusted according to video activity. For power, you can choose between PoH (Power over HDBaseT) or 24V DC local power. Some things to note: Make sure the cables you use are of good quality, especially when using HDBaseT technology. Don't expose the device to extreme temperatures or humidity. If you encounter any compatibility issues, try adjusting the EDID modes. For maintenance, keep the device clean and dust - free. Check the connections regularly to ensure they are secure. If there are any problems, refer to the user manual or contact customer support.