Product Description
The Vaddio 999 - 9560 - 000 Cisco Codec Kit is designed for Cisco Telepresence SX20, SX80, or C - Series Codecs. It offers greater flexibility in room design and installation. OneLINK Codec Kits give you more freedom in camera selection and equipment placement. When connecting a Cisco codec to a Cisco Precision 40 or PrecisionHD 1080p2.5x camera, or a Cisco SX20 codec to any camera, you'll need a Cisco CAB - PHD4XS2 - SPLIT cable. The benefits are numerous. It provides more flexibility in camera and codec placement, no longer tied to the codec's location. The HDBaseT interface can extend power, video, and control up to 328 feet (100 meters), allowing Cisco systems to fit into larger rooms. You have the freedom to choose cameras, whether Cisco or Vaddio, and connect them to codec rooms. There's camera interoperability, with RoboSHOT cameras usable with Cisco codecs. You can select the right camera for the room from options like RoboSHOT cameras with 12x, 20x, and 30x zoom. It's plug - and - play and has an intuitive browser - based user interface for camera control and remote management. This package includes an OneLINK HDMI Interface, an OneLINK HDMI EZIM with mounting screws, a thin - profile black wall mount with hardware, a quick - start guide, a 48V power supply with AC cord sets, various lengths of cat - 5 cables, HDMI cables, a power cable for the camera, and EZCamera RS - 232 control adapters. Note that if connecting to a Cisco PrecisionHD 4xS2 camera or a Cisco SX20 codec, a user - supplied Cisco CAB - HDMI - PHD4XS2 - SPLIT cable is required. Key features include a simple, clutter - free camera extension with HDBaseT technology and the ability to transmit power, control, and video up to 328ft (100m) over a single Cat - 5e/6 cable.
Using this Vaddio Cisco Codec Kit is easy. First, refer to the quick - start guide in the package. Mount the thin - profile black wall mount using the provided hardware. Connect the OneLINK HDMI Interface and the OneLINK HDMI EZIM with the mounting screws. Then, use the various cables in the package to connect the codec and the camera. Remember, if you're connecting to a Cisco PrecisionHD 4xS2 camera or a Cisco SX20 codec, you need to supply a Cisco CAB - HDMI - PHD4XS2 - SPLIT cable. When it comes to maintenance, keep the cables in good condition and avoid bending them too much. If there are any issues with camera control, you can use the intuitive browser - based user interface for remote management. Also, make sure the 48V power supply is properly connected and the AC cord is in good shape. This will help ensure the long - term performance of your codec kit.
