Product Description
The AJA OG-HA5-12G is a high - performance video conversion device. It seamlessly transforms an HDMI 2.0 input into 12G - SDI for smooth 4K/UltraHD single link outputs. This device comes with two 12G - SDI distribution amplifier outputs and can handle 8 or 2 - channels of embedded audio from an HDMI source. It supports Extended Display Identification Data (EDID) emulation, making sure the connected source always provides custom - preferred video formats on output. The OG - HA5 - 12G - T and OG - HA5 - 12G - T - ST Fiber SFP equipped models are single - channel transmitters. They can extend HDMI 4K/UltraHD signals over long distances, up to 10km via a single LC or ST Fiber link respectively. These models come with pre - installed SFPs and offer all the features of the OG - HA5 - 12G, along with the ability to transmit audio and video signals further. Key features include converting HDMI 2.0 to 4K/UltraHD 60 fps to 12G - SDI with a second mirrored output, supporting up to 60p input at 4:4:4/4:2:2/4:2:0, and enabling 12 - bit workflows. It also has EDID LFR & HFR Emulation up to UltraHD 60p, real - time HDMI HDR Infoframe data reporting, HDR signaling metadata pass - through and optional override, and simple Frame Rate Conversion (FRC) between fractional and integer rates. You can select embedded audio from the HDMI or Analog audio inputs, and it allows pass - through of AC - 3 (Dolby Digital) and E - AC - 3 (Dolby Digital Plus) compressed audio, including DD+ Atmos. You can monitor and control it via Ross DashBoard software, and it consumes a maximum of 14 watts per card. Technical Specifications: It supports various video formats such as (4K) 4096x2160p, (UltraHD) 3840x2160p, etc. The video input is a 1x HDMI Type A connector with HDMI v2.0, and the video output has multiple 12G - SDI, 6 Gb SDI DL, 3 Gb SDI, 1.5 Gb SDI, and 270 Mb SDI options. The product includes 1x AJA OG - HA5 - 12G and comes with a 5 - Year Warranty.
Using the AJA OG - HA5 - 12G is quite straightforward. First, connect your HDMI 2.0 source to the HDMI Type A connector on the device. This will be your input for the video and audio signals. The device will then convert this HDMI 2.0 input into 12G - SDI output. You can use the two 12G - SDI distribution amplifier outputs to connect to other compatible devices. If you want to select the audio source, you can choose between the HDMI or Analog audio inputs according to your needs. To monitor and control the device, you can use the Ross DashBoard software. Just install it on your computer and connect the device to your network. When it comes to the models with Fiber SFP (OG - HA5 - 12G - T and OG - HA5 - 12G - T - ST), if you need to extend the HDMI 4K/UltraHD signals over long distances, connect the appropriate LC or ST Fiber link. Now, for some important notes. Make sure that the power supply for the device is stable and within the specified power range of 14 watts per card. Also, when connecting cables, ensure they are properly plugged in to avoid signal loss or interference. As for maintenance, keep the device in a clean and dry environment. Regularly check the connectors for any signs of damage or dirt. If you notice any issues with the device, such as abnormal video output or audio problems, first check the connections. If the problem persists, you can refer to the warranty information. With a 5 - year warranty, you can have peace of mind knowing that the manufacturer will support you if there are any defects.
