The Datavideo NVD - 35 Mark II SDI IP Video Decoder is a top - notch device. It can decode all common streaming protocols directly from major platforms like YouTube Live, UStream, etc., and skips third - party ads. It supports a wide range of protocols such as SRT, RTSP, RTMP, etc. The new SRT protocol offers security, reliability, and low latency, enabling high - quality, ultra - low - latency video streaming even in unstable networks. This decoder supports SDI and Composite video output up to 1080p 50/60 FPS and RCA audio output. It's seamlessly compatible with dvCloud, allowing global control and use as an IPTV set - top box. It can be paired with Datavideo NVS - 33/34/40 encoders to build a Full HD video transmission architecture. It also has real - time video flipping and rotating functions, and comes with an RMC - 12 remote control for easy operation. Technical specs include various audio/video inputs, RCA and SDI audio outputs, Composite and SDI video outputs, 1x RJ - 45 Female network, and support for multiple video resolutions. It has web - based configuration, automatic firmware upgrade, and operates on AC 100 - 240V with DC 12V/1A output. It has specific temperature requirements and comes with the product, a DC 12V AD Switch, and a remote control in the box.
Using the Datavideo NVD - 35 Mark II is easy. First, connect it to a power source using the provided AC 100 - 240V switching adaptor which outputs DC 12V/1A. Then, connect it to your network via the 1x RJ - 45 Female port. You can use either DHCP or set a static IP. To start decoding, select your desired streaming source. It can directly access major platforms and decode common streaming protocols. You can control the decoder through a web browser or use TCP/IP socket commands. If you're using dvCloud, you can control it from anywhere in the world. For video output, connect your display to either the SDI or Composite output. For audio, you can use the RCA outputs. When using it, keep it in an environment with an operating temperature between 0 - 40°C. For storage, the temperature should be between - 10 - 60°C. To maintain the device, keep it clean and ensure it has proper ventilation. The decoder will automatically upgrade its firmware, so you don't have to worry about manual updates.
