The Datavideo PTC-140NDI is a top - notch PTZ camera perfect for broadcast, worship, and video conferencing. It offers a resolution up to 1920x1080 at a frame rate of 60fps. With an advanced low - noise CMOS sensor, it ensures high SNR, and uses 2D/3D noise reduction tech to cut down noise while keeping images sharp. Available in dark blue and white, this camera supports H.264/H.265 video compression for resolutions up to 1920x1080 at 60fps and 2 - channel 1920x1080p at 30fps, along with AAC, MP3, and PCM audio compression. You can control it in multiple ways, like using Datavideo RMC - 300A, 300C, and 180 for real - time pan, tilt, and zoom. It also has RS - 232, RS - 422, and RS - 485 ports for integration with larger control systems. Thanks to NDI | HX technology, you only need one Ethernet cable to transfer video, audio, power, tally, and control, and it has Power Over Ethernet (PoE) functionality. The camera has a 1/2.8 - inch high - quality HD CMOS sensor, about 2.07 megapixels, S/N ratio >55dB, and min. illumination of 0.5Lux (F1.8, AGC ON). It offers a 20x optical zoom and 10x digital zoom, and has a wide range of features like various white balance settings, auto/manual focus, and 255 preset positions.
Using the Datavideo PTC - 140NDI is a breeze. First, connect it to power. You can use the Power Over Ethernet (PoE) feature, which means just one Ethernet cable for both power and data. Once powered, connect the camera to your control system using the available ports like RS - 232, RS - 422, or RS - 485. You can also use the LAN port for IP control. For real - time movement, use the Datavideo RMC - 300A, 300C, or 180. When setting up the video, choose the right resolution and frame rate according to your needs. Remember, it supports up to 1920x1080 at 60fps. As for audio, connect your audio source to the 3.5mm line - in. When it comes to color, you have a choice between dark blue and white. In terms of maintenance, keep the camera in an environment with a temperature between 0 and 40 degrees Celsius. Clean the lens regularly using a soft, dry cloth. If you need to update the firmware, use the Ethernet connection. And always follow the safety instructions in the user manual.
