The DJI Zenmuse P1 is a top-notch 3-axis stabilized drone camera with a full-frame sensor and comes with a 1-year Shield Plus coverage. It's designed for photogrammetry flight missions, offering a new level of efficiency and accuracy.
**Extraordinary Efficiency**: With a full-frame, low-noise high-sensitivity sensor, it can take a photo every 0.7 s during flight and cover 3 km² in one flight.
**Remarkable Accuracy**: Equipped with a global mechanical shutter and TimeSync 2.0, it synchronizes time across modules at the microsecond level. Combined with real-time position and orientation compensation technology, it captures centimeter-accurate data.
**Robust Versatility**: Thanks to the integrated 3-axis gimbal that can use 24/35/50mm lenses and the Smart Oblique Capture feature, it can create 2D, 3D, and detailed models.
**Full-frame Camera**: It has a 45MP full-frame sensor with 4.4μm pixel size. Low-noise, high-sensitivity imaging extends daily operation time. TimeSync 2.0 aligns the camera, flight controller, RTK module, and gimbal at the microsecond level.
**Smart Oblique Capture**: Cover 7.5 km² in a single workday. The gimbal automatically rotates to take photos at different angles, and only essential photos are taken at the flight area edge, increasing post-processing efficiency by 20% - 50%.
**Smart Data Management**: Mission result files are automatically associated with the mission name and time. There's a centralized storage for photos, GNSS data, and TimeStamps.MRK files. Image metadata contains camera parameters and RTK status.
**Fieldwork Report**: Check position data, image number, RTK status, and positioning accuracy right after the flight to verify data quality.
**Missions**: It can handle 2D orthomosaic, 3D oblique, detailed modeling, and real-time mapping missions, suitable for various industries.
**Key Features**: Accuracy without GCPs (3 cm horizontally / 5 cm vertically), high efficiency, 45 MP full-frame sensor, 3-axis stabilized gimbal, smart oblique capture, global mechanical shutter, TimeSync 2.0, and support for 24/35/50mm lenses.
**Technical Specifications**: Dimensions are 198x166x129 mm, weight is about 800 g, power is 20W, IP rating is IP4X. It supports the Matrice 300 RTK and operates from -20°C to 50°C, stores from -20°C to 60°C. The camera has a full-frame sensor, supports specific lenses, SD cards, and has various photo and video settings.
Using the DJI Zenmuse P1 is a breeze. First, make sure your drone is the Matrice 300 RTK as this camera is designed for it. Attach the camera securely to the drone using the detachable DJI SKYPORT mount. When you're ready for a flight, choose the appropriate mission mode like 2D orthomosaic, 3D oblique, or detailed modeling depending on your needs. For the Smart Oblique Capture, the gimbal will do the work of rotating to get the right angles for you. During the flight, the camera will take photos every 0.7 seconds, thanks to its efficient sensor.
Here are some important notes. Keep the camera within the operating temperature range of -20°C to 50°C. If it's too hot or cold, it might not work properly. Use SD cards with a UHS-I rating or above, and don't exceed the 512 GB capacity. When it comes to maintenance, regularly check the gimbal for any signs of damage. Clean the lenses carefully with a soft cloth. After each flight, check the data in the fieldwork report to make sure everything went well. If you have any issues, you can rely on the 1-year Shield Plus coverage for free repair and replacement services within the coverage amount.
