Product Description
The Gefen EXT - UHDA - HBTL - RX is a top - notch HDBaseT receiver. It can extend HDMI signals up to 70 meters (230 feet) at 1080p and 40 meters (130 feet) at 4K using just a single CAT - 5e cable. This receiver extracts analog L/R, TOSLINK optical digital, and coaxial digital audio from the video, making it great for separate audio systems and enhancing presentation impacts. It uses Gefen's advanced HDBaseT technology, accommodating 10.2 Gbps of data throughput and a 300 MHz TMDS clock frequency. It supports HDMI 2.0 resolutions up to 4K Cinema - DCI (4096 x 2160 to 30 Hz 4:4:4) and 4K Ultra HD (3860 x 2160 to 60 Hz, 4:2:0, or 30 Hz 4:4:4), with HDCP 2.2 or 1.4. It passes through high - performance multichannel digital audio like 7.1 channels of LPCM and HBR formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS - HD Master Audio to the HDMI output. When used with a compatible sender unit, it extends RS - 232 and 2 - way IR, allowing easy control of AV sources from the viewing location and sending commands to control the display near the receiver. Key features include support for 300 MHz TMDS clock and 10.2 Gbps data throughput, HDMI 2.0, HDCP 2.2 and 1.4, 12 - bit deep color at 1080p, and much more. It has a compact, ultra - low - profile enclosure that can be surface - mounted and hidden. Shipping info: length 7.3 inches, width 5.2 inches, height 5.6 inches, weight 1.45 lbs, UPC 888814999907.
Using the Gefen EXT - UHDA - HBTL - RX is easy. First, connect it to a compatible sender unit with a single CAT - 5e cable. Then, connect your HDMI source to the sender and your display to the receiver's HDMI output. You can also connect your audio system to the appropriate audio output ports. When powering it, note that if you're not powering a sender, the maximum power consumption is 9W, and if you are, it's 22W. Only one side needs external power thanks to the Bi - Directional Power over HDBaseT. For control, use the RS - 232 and 2 - way IR extensions when paired with a compatible sender. Keep it in a dry and cool place. The firmware can be updated via RS - 232 using the Gefen Syner - G software. If you have any issues, check the LED indicators. A blue power LED means it's powered, a green link LED shows a good connection, and a green HDCP LED indicates proper HDCP functionality.
