Intelix DIGI-HD60-S HDBaseT HDMI Over Twisted Pair Extender, Transmitter

The Intelix DIGI-HD60-S is an amazing HDMI extender that uses HDBaseT technology to transmit HDMI signals over a single cable. It supports 1080p video signals, including HDCP 2.2 and multichannel audio, up to 60 meters. It can also handle 3D and 4K x 2K (UHD) signals up to 35 meters. With built-in surge protection and diagnostic LEDs, installations are hassle-free and reliable. The flexible power design allows you to power the units at either the TX or RX end, and only one power supply (sold separately) is needed. The DIGI-HD60 series extenders work well with all Intelix HDBaseT products and any HDBaseT - compliant product. Key features include HDMI transmission up to 60m, support for 3D, 4Kx2K (UHD), and 7.1 audio formats, compliance with HDBaseT, CEC, HDMI, and HDCP 2.2, built - in surge protection and diagnostic LEDs, PoE (Power over Ethernet) from RX when used with DIGI - HD60 - R, and a locking power connector.

Using the Intelix DIGI - HD60 - S is quite easy. First, connect the HDMI source to the transmitter unit. Then, use a single cable to link the transmitter to the receiver at the other end. Connect your display device to the receiver's HDMI output. You can power the system at either the transmitter or receiver end with the separately sold power supply. If you're using it with the DIGI - HD60 - R, you can also use PoE for power. When it comes to maintenance, keep the unit in a clean and dry place. Avoid exposing it to extreme temperatures or humidity. Check the diagnostic LEDs regularly to make sure everything is working properly. And don't forget that if there's a power surge, the built - in surge protection will safeguard the unit. Just follow these steps and you'll have a great experience with your DIGI - HD60 - S.