Kramer 4X1S 4 x 1 s-Video Mechanical Switcher

The Kramer 4X1S is an outstanding high - performance switcher designed for s - Video (Y/C) signals. It allows you to easily switch any one of four s - Video signals to a single output. Key features include high bandwidth of 400MHz (-3dB) for the Y signal, mechanical (passive) switching that needs no power, and its compact design. With the optional RK - 3T rack adapter, you can mount three units side - by - side in a 1U rack space. Technical specs: INPUTS are 4 s - Video on 4 - pin connectors with 1Vpp/75 OHM (Y) and 0.3Vpp/75 OHM (C). OUTPUT is 1 s - Video on a 4 - pin connector with the same voltage and impedance. Bandwidth (-3dB) for Y is 400MHz. The switching system is mechanical, break - before - make. Dimensions are 12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) (W, D, H) and it weighs about 0.3kg (0.66lbs). It comes with a mounting bracket and the RK - 3T 19” rack adapter is an available option.

Using the Kramer 4X1S is quite straightforward. First, connect your four s - Video input sources to the four 4 - pin input connectors on the switcher. Then, connect your display or other output device to the single 4 - pin output connector. Since it's a mechanical switcher, you can simply select the input signal you want to send to the output. There's no need to worry about powering it on as it doesn't require any power. When it comes to installation, if you want to save rack space, you can use the optional RK - 3T rack adapter to mount three units side - by - side in a 1U rack. For maintenance, keep it in a clean and dry place. Avoid exposing it to extreme temperatures or humidity. If it gets dirty, you can use a soft, dry cloth to gently wipe the exterior. And that's all you need to know to make the most of your Kramer 4X1S switcher.