Primacoustic RX7 Horizontal Fire Recoil Stabilizer, 10.5 x 13-Inch

The Primacoustic RX7 Horizontal Fire Recoil Stabilizer, sized at 10.5 x 13 inches, is an outstanding nearfield monitor platform. It combines four essential elements to form a perfect whole. First, the retention pad features a thin, non - slip neoprene surface. This surface firmly secures the nearfield monitor on the top, ensuring maximum signal transfer. Second, the steel platform is laser - cut from ¼” (6mm) steel. It adds the necessary stabilizing mass, holding the monitor rigidly in place. Third, the curved front panel not only eliminates standing waves but also adds mass to the platform without increasing its footprint. Finally, the isolation foam, made of high - density open - cell acoustic foam, provides excellent acoustic isolation, eliminating coupling between the loudspeaker and the shelf. Technical details include a 1/4” steel deck with a non - slip pad and a high - density foam base.

Using this Primacoustic RX7 Recoil Stabilizer is easy. First, place the stabilizer on a flat surface. Then, gently put your nearfield monitor on the retention pad on the top of the stabilizer. The non - slip surface will keep it in place. When using, make sure the surface where you place the stabilizer is clean and dry to prevent any slippage. Avoid placing heavy objects on the monitor or the stabilizer to prevent damage. For maintenance, you can use a soft, dry cloth to clean the steel platform and the neoprene retention pad. If the isolation foam gets dirty, you can use a mild soap and water solution to clean it gently, then let it dry completely before using it again.