The Sonifex AVN - AESIO8R is an outstanding audio converter and interface. It can convert up to eight digital stereo AES3 inputs and outputs to and from the Dante Audio - over - IP networking standard. Each input can handle sample rates from 32kHz to 192kHz, and the input sample rates are converted to match the Dante system sample rate. The front - panel AES3 lock LEDs confirm valid input signals for each input. All outputs follow the Dante system sample rate.
Key Features:
- 8 balanced digital stereo AES3 inputs on XLR, supporting 32kHz - 192kHz input rates.
- Sample rate conversion on physical inputs for seamless integration with the Dante system.
- 8 balanced digital stereo AES3 outputs on XLR, with output rates matching the Dante system.
- 2 RJ45 Dante connectors (1Gb/s Ethernet Port) for redundant or switched mode operation.
- PoE and Link LED status indicators for each Ethernet port.
- Clock LED status indicator.
- AES3 Lock LED status indicators for each input.
- Configuration using Dante Controller.
- Compliant with AES67 operation and Dante Domain Manager.
- Powered by PoE on either or both Ethernet ports for power supply redundancy.
- Comes in a 1U 19” rack - mount form factor.
Technical Specifications:
**Network and AoIP**: Dante AoIP standard, 16 receive and 16 transmit channels and streams. Sample rates include 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz. Format is Linear PCM, 16, 24, or 32 bit. Supports AES67. Connectivity is via 2 RJ45, with speeds of 1Gbps or 100Mbps. Network modes are switched or redundant and is Dante Domain Manager ready.
**AES3 Input**: 110ohms balanced input impedance, supports multiple input rates which are converted to the Dante system rate, AES3 - 2009 compliant signal level, up to 24 bits bit depth.
**AES3 Output**: 110ohms balanced output impedance, output rates set as per Dante system, AES3 - 2009 compliant signal level, 24 bits bit depth.
**PoE Power**: Follows 802.3at Type 1 standard, Class 0. PD power range is 0.44 W to 12.94 W, typical PSE power usage is 7W, max is 15.4 W.
**Physical**: Dimensions are 48cm (W) x 11cm (D) x 4.3cm (H) (1U) or 19” (W) x 4.3” (D) x 1.7” (H). Net weight is 1.0kg (2.2lbs) and gross weight is 1.5kg (3.3lbs).
Using the Sonifex AVN - AESIO8R is a breeze. First, connect your audio sources to the 8 XLR balanced digital stereo AES3 inputs. Make sure to check the front - panel AES3 lock LEDs to confirm that valid input signals are detected. Then, connect the device to your network using the 2 RJ45 Dante connectors. You can choose between redundant or switched modes according to your needs.
When it comes to power, you can use PoE on either or both Ethernet ports. This provides power supply redundancy, so you don't have to worry about power failures.
To configure the device, use the Dante Controller. It allows you to easily set up the audio parameters and make sure everything works smoothly.
Here are some important notes. Always ensure that your input sample rates are within the supported range of 32kHz to 192kHz. Also, be aware that the output rates will follow the Dante system sample rate.
For maintenance, keep the device in a clean and dry environment. Check the LED status indicators regularly to monitor the network connection, clock, and input signal status. If you encounter any problems, refer to the technical specifications or contact the Sonifex support team.
