Product Description
The Tascam US-4x4HR is a top-notch and flexible solution for all your audio recording needs. With four XLR mic inputs and four TRS line inputs, it offers amazing flexibility, even supporting guitar input on IN1 - 2. It's a great pick for podcasters, live streamers, and musicians. Thanks to a newly developed audio circuit, it supports up to 192 kHz audio formats, delivering high - quality sound for a professional recording experience.
This interface stands out with its easy - to - use design and intuitive operation. The loopback function makes it ideal for live streaming, and OBS support further boosts its streaming capabilities. The MIDI IN/OUT ports add to its versatility, allowing compatibility with various musical instruments and MIDI devices. It also comes with a great selection of software to start you off right away.
Unlike many audio interfaces, the US - 4x4HR provides zero - latency direct monitoring and is powered by USB bus power, perfect for mobile recording. It's compatible with iPads and other iOS devices, so you can record flawlessly whether you're in the studio or on the move.
**Key Features**:
- 4 - in/4 - out USB audio interface
- Supports up to 24 - bit/192kHz audio formats
- Improved TASCAM driver with selectable buffer size from 4 samples
- Four XLR/TRS combo inputs with Ultra - HDDA mic preamps and +48V phantom power
- Combo TRS line inputs with guitar input support on IN1 - 2
- TRS line outputs 1 - 2/3 - 4
- Two headphone outputs
- MIDI IN/OUT terminals
- USB Type - C connection (USB Type - A to Type - C cable included)
- Powered by USB bus power
- Zero - latency direct monitoring
- Compatible with iPad and other iOS devices
**Specifications**:
- Sampling frequency: 44.1k/48k/88.2k/96k/176.4k/192k Hz
- Quantization bit rate: 24bit
- MIC IN: XLR - 3 - 31 connector, 2.2k ohms input impedance +9dBu max input level, 56dB gain
- INST IN: 6.3mm TS - jack, unbalanced, 1M ohms or more input impedance +10dBV max input level, 56dB gain
- LINE IN: 6.3mm TRS - jack, balanced, 10k ohms input impedance +20dBu max input level, 56dB gain
- LINE OUT: 6.3mm TRS - jack, balanced, 210 ohms output impedance +4dBu nominal output level +20dBu max output level
- PHONES: 6.3mm stereo phone jack, 45mW + 45mW max output level
- MIDI IN/OUT: Din 5 - pin, standard MIDI format
- USB: Type - C, USB2.0 HIGH SPEED (480Mbps)
- Power: USB bus powered, AC Adapter (TASCAM PS - P1220E, included)
- Dimensions: 296(W) x 65(H) x 160(D)mm
- Weight: 3.53lb (1.6kg)
- Operating temperature: 5 to 35C
**Package Contents**:
- AC adapter (TASCAM PS - P1220E)
- USB cable (Type - A to Type - C)
- Set of DAW software installation guides
- Set of DAW plug - in software installation guides
- Owner's Manual (including warranty)
Using the Tascam US - 4x4HR is a breeze. First, connect it to your computer or iPad using the included USB cable. If you're using a power - hungry setup, you can also plug in the AC adapter.
For microphone input, use the XLR ports and make sure to turn on the +48V phantom power if your mic needs it. If you're connecting a guitar or other instrument, use the IN1 - 2 ports.
When it comes to live streaming, activate the loopback function and use OBS for a great streaming experience. You can also connect MIDI devices through the MIDI IN/OUT ports to expand your musical capabilities.
Remember to keep the interface in an environment with a temperature between 5 to 35 degrees Celsius. Don't expose it to moisture or extreme heat.
For maintenance, keep it clean by using a soft, dry cloth. If there's dust inside the ports, use compressed air to blow it out gently. Always follow the software installation guides carefully to get the most out of your DAW software and plug - ins. And don't forget to check the owner's manual for any specific instructions or warranty details.
