Product Description
The Thor H - HD - IRD - V3A is a top - notch integrated receiver decoder. Part of the Thor H - HD - IRD series, it's designed to decode program content into broadcast - quality video. This device comes with all major video signal outputs, including HD - SDI, enabling it to deliver high - definition video to any display or professional video system. It also features modern digital audio outputs via optical Toslink and XLR connectors. Standard Dolby AC/3 audio pass - through and support for 608 and 708 closed captioning systems are great additions.
Key Features:
- It's a broadcast - level integrated receiver decoder system.
- Equipped with an integrated RF Tuner for ATSC 8VSB antenna - type TV.
- Can decode any IP or ASI program from SPTS or MPTS.
- Managed over a dedicated network interface.
- Supports 608 closed captions and 708 on HD - SDI output.
- Allows remapping of PIDs from any TS input to any TS output.
- Capable of processing, remapping, and remultiplexing up to 32 streams.
Technical Specifications:
- Inputs include RF Tuner (DVB - S/S2, ATSC Off Air, Cable QAM, DVB - T, ISDB - T, DVB - ASI, Network IP).
- Supported output resolutions are HD - SDI (1080i, 720p, 720i, 576i, 480i), HDMI (1080i, 720p, 720i), YPbPr (1080, 720p, 720i), and CVBS (576i, 480i).
- Video codecs support H.264 and MPEG - 2.
- Audio codecs support MPEG1 Layer 2, MPEG2 Layer 2, Dolby AC/3, HD - AAC V2, LC - AAC.
- ASI input: 1x BNC 188/204 format up to 200 Mbps.
- IP input: 1x RJ - 45 10/100 UDP or RTP up to 85 Mbps.
- RF input: 1x Type - F with various frequency and bandwidth options.
- Audio output: 2x BNC (analog unbalanced), 2x XLR (digital AES/EBU), 1x Toslink (digital optical).
- IP transport stream output: 1x MPTS UDP or RTP, 1 - 32x SPTS UDP or RT.
- ASI transport stream output: 2x ASI multiplexed output, 2x ASI tuner pass - through.
- Management interface: Web - based browser interface, full front - panel LCD interface, front - panel LCD video monitor.
- Dimensions: 20 x 18 x 1 - 1/2 Inches.
- Weight: 7 lbs.
- Operating temperature: 28 ~ 110 degrees F.
Using the Thor H - HD - IRD - V3A is quite straightforward. First, connect your input sources according to the type, such as RF, ASI, or IP. Make sure the cables are properly plugged in. Then, use the web - based browser interface or the front - panel LCD to configure the settings like input selection and output resolution.
When it comes to closed captioning, if you want to view captions, just enable the 608 or 708 support in the settings.
For audio, choose the appropriate output connector based on your needs, whether it's the analog BNC, digital XLR, or optical Toslink.
Here are some important notes. Always operate the device within the recommended temperature range of 28 to 110 degrees F. Avoid exposing it to extreme heat, cold, or humidity.
For maintenance, keep the device clean by gently wiping it with a dry cloth. Check the cables regularly for any signs of damage. If you have any issues, refer to the user manual or contact the customer support team.
