Product Description
The Datavideo PTC-140TW is a white PTZ camera designed for HS-1500T or HS-1600T. It features a 1/2.8 inch CMOS sensor, delivering 1920x1080px Full HD resolution at 60fps. With 20x optical zoom and 10x digital zoom, it can capture sharp shots from near or far. Using HDBaseT technology, it enables single cable transmission of all signals, power, and control data via a CAT6 cable. When used with the Receiver Box, it can transmit up to 100 meters away. It also has an advanced 2D/3D noise reduction function, ensuring clear and smooth images even in poor lighting. The built - in streaming encoder supports H.264/H.265 video compression for streaming up to 2 simultaneous streams to any cloud service. The RMC - 180 offers simple multi - camera control, and the RMC - 300C can control up to 24 PTC - 140T cameras when paired with an iPad or Android tablet. It supports various video formats, has excellent image quality parameters, and comes with a range of useful features and interfaces. It is available in black and white colors, and comes with a complete set of accessories in the box.
Using the Datavideo PTC-140TW is quite straightforward. First, connect the camera to the power source using the provided DC 12V power adaptor and cord. Then, connect the camera to your system via the HDBaseT or RJ - 45 ports. You can use the included IR remote controller to operate the camera. If you want to control multiple cameras, you can use the RMC - 180 or RMC - 300C. When using the RMC - 300C, pair it with your iPad or Android tablet. For the best results, try to place the camera in a well - lit area, but don't worry too much about lighting as the camera has a great noise reduction function. When mounting the camera, use the included ceiling mount brackets and screws. Make sure the camera is securely fixed. As for maintenance, keep the camera clean. You can use a soft, dry cloth to wipe the lens and body. Avoid using harsh chemicals. Also, store the camera in a cool, dry place within the operating temperature range of 0 - 40 C. If you need to update the firmware, connect the camera to the network via Ethernet. And don't forget to handle the included accessories with care, as they are essential for the proper functioning of the camera.
