The Autoscript EVO-IP19 On-Camera System Package comes with a 19-inch prompt monitor. The new EVO-IP prompt monitor is the slimmest in the broadcast market, just 41.5mm deep. This sleek 19-inch monitor offers a large yet lightweight solution for productions. Key features include a 19-inch size, being the lightest on-camera system, which minimizes camera support issues. It connects directly to WinPlus-IP for easy integration and perfect synchronization without a scroll box. The folding hood design saves setup time for time-critical tasks and protects the glass during transport. The optimized mounting kit and hood geometry allow the use of the widest lenses (4.3mm) available. It doesn't need a counterbalance for most camera/lens setups, further reducing weight. With 4 integrated tally lights, it provides 270 degrees of visibility around the teleprompter. Integration with the CLOCKPLUS-IP clock and camera ID display (not included) creates an appealing time, tally, and camera ID solution. You can upgrade to EPIC-IP by adding an ETM. The package includes a 19-inch high-bright prompt monitor (EVO-IP19M), a carbon fiber hood and glass (HOOD-IP19), a mounting system and camera carriage assembly for ENG cameras and camcorders, a tally sensor and cable (SNSR-IP), and a cable tray (MT-CABLE). Technical specifications: Size is 19 inches, monitor only weighs 3.9 kg / 8.6 lb, on-camera package weighs 11.5 kg / 25.4 lb, aspect ratio is 4.3, brightness is 1500 nits, resolution is 1280 x 1024 SXGA with a contrast of 1000:1, script inputs are LAN, 2x HD-SDI, 2x CVBS, tally input is an opto sensor, timecode inputs are LTC, NTP (VITC, D-VITC optional), power consumption is 29W, power input is 4-pin XLR, 12 - 16.8VDC, outputs include a repeat tally output with 12V DC Out, viewing angle is H/V 170 Degrees/160 Degrees, dimensions are 467 x 399 x 41mm / 18.4 x 15.7 x 1.6 inches, and it has an on-camera system with an Intelligent Prompting backplate, carbon fiber hood and glass, rail, and mounting bracket.
Using the Autoscript EVO-IP19 On-Camera System Package is a breeze. First, assemble the mounting system and camera carriage assembly to your ENG camera or camcorder. Connect the prompt monitor using the provided cables. Make sure to connect the tally sensor and cable correctly for proper tally indication. For script inputs, you can use LAN, HD-SDI, or CVBS. When it comes to timecode, choose from LTC, NTP, or optionally VITC and D-VITC. Power the system using a 4-pin XLR with 12 - 16.8VDC. When setting up, take advantage of the folding hood design to quickly get the system ready, especially for time-critical applications. The integrated tally lights will give you 270 degrees of visibility, so you can easily tell when it's your turn. If you want to upgrade to EPIC-IP, just add an ETM. Maintenance is simple. Keep the monitor and glass clean using a soft, dry cloth. During transportation, use the folding hood to protect the glass. Avoid exposing the system to extreme temperatures or humidity. And always make sure to disconnect the power before making any cable changes or moving the system.
