The dB Technologies AC26N is an amazing digital audio processor that gives you full control over both active and passive professional audio systems. It comes with two balanced analog inputs and six balanced analog outputs, along with two digital AES/EBU in/out options and an RDNet control. This setup enables easy and comprehensive control. Each output has a parametric equalizer, delay, phase, and level control, all powered by a unique 28/56 Bit DSP. You can control this processor via the front control panel or an RDNet - connected computer. Key features include 28/56 - bit DSP processing, parametric EQ, delay, phase, compressor/limiter, and level control. It also has 24 - bit 96 kHz AD/DA converters, 2 balanced inputs by 6 balanced outputs with flexible routing, 2 x AES/EBU inputs and outputs, an RDNet hardware interface, and can be remotely controlled via the front panel, USB, or RDNet using dBTechnologies software.
Using the dB Technologies AC26N is easy. First, connect your professional audio system to the inputs and outputs. You can choose between analog and digital connections depending on your setup. If you want to control it directly, use the front control panel. For more convenience, connect a computer via RDNet and use the dBTechnologies software. When adjusting the audio, you can play around with the parametric equalizer, delay, phase, and level control on each output to get the sound you like. Remember to handle the device gently and keep it in a dry and clean environment. When not in use, turn it off to save energy. Regularly check the connections to make sure they are secure. If you have any technical issues, refer to the user manual or contact dB Technologies support.
