The Digital M_SH Bridge is an outstanding device that efficiently converts SDI signals of SMPTE standards to HDMI signals. It supports formats up to 1080p60. Additionally, it can provide CVBS outputs for monitoring and fix the output in a specific format. Key features include being a HD/SDI to HDMI converter, having a small size with a high - end video processing engine inside. It allows SDI signal monitoring for TV, offers normal bypass or fixed format out modes. There is 1 HD/SDI input (supporting SD/HD/3G all standard formats), 1 HD/SDI input re - clocking out, and 1 HDMI out (also for SD/HD/3G all standard formats). It has low power consumption and a wide DC 5V - 24V operating range. Technically, it supports HDMI v1.3 and multi - rate SDI formats. Physical dimensions are 68 x 59.2 x 20 (mm), weighs 90g, runs on +12 VDC power, with a power consumption of up to 4 Watts. It can operate at temperatures from - 20 to 70 degrees and in humidity from 0 to 95% RH (non - condensing), with a data rate of 3 Gbps and signal level of 800mVp - p +/- 50m.
Using this Digital M_SH Bridge is easy. First, connect the HD/SDI source to the HD/SDI input. Then, connect your HDMI - compatible device to the HDMI output. If you want to monitor the SDI signal on a TV, you can use the CVBS output. You can choose between the normal bypass mode or the fixed format out mode according to your needs. When it comes to power, make sure to use a power supply within the 5V - 24V DC range. Keep in mind that the device has a maximum power consumption of 4 Watts. For maintenance, keep it in a dry place within the operating temperature range of - 20 to 70 degrees. Avoid exposing it to high humidity to prevent damage. Also, be gentle when handling the device as it is relatively lightweight and small.
