Product Description
The KanexPro HDMMX6464 - 4K is a top - notch 64 - input by 64 - output modular matrix switcher. It comes with 16 input and 16 output slots, and each modular card can support up to 16 device connections. You can control it via the front - panel buttons, or through IR, RS232, or TCP/IP connections. Key features include customizable 64x64 switching for various AV setups, 4K UHD resolution over HDMI and HDBaseT, support for multiple connection types like VGA, SDI, DVI, HDMI, HDBaseT, and fiber optic. It has high - bandwidth up to 10.2 Gbps, allows for adding I/O modular cards, offers cross - point ultra - switching, advanced HDCP and EDID management, hot - swappable design, clear illuminated buttons, and can be controlled via IR, Ethernet, and RS - 232. It also has 10 global presets, a front - panel LCD for status and switching, a security lock, a 10 RU rack - mountable aluminum enclosure, and a dual - internal power supply (100Volt~240Volt AC, 50/60Hz). Technical specs: I/O connections have 16 input and 16 output cards, 340 MHz (10.2 Gbps) bandwidth per I/O, 75 - ohm impedance, 200ns max switching speed, 0 dB gain, 5nS (+/- 1nS) max delay. Control options include an RS - 232 9 - pin female D connector with pin config 2 = TX, 3 = RX, 5 = GND, front - panel buttons, and TCP/IP control via Ethernet. It uses 110VAC ~ 240VAC, 50/60Hz power, consumes 400 watts when fully populated, has 15kV ESD protection, meets CE and RoHs regulations, and has dimensions of 483mm x 712mm x 222mm (19 in. x 28 in. x 8.75 in.) with a shipping weight of 12 kg (26 lbs.).
Using the KanexPro HDMMX6464 - 4K is easy. First, connect your input devices to the input cards and output devices to the output cards according to the supported connection types. You can use the front - panel buttons for basic control, or connect it via IR, RS232, or Ethernet for more advanced control. For Ethernet control, make sure your network settings are correct. When adding or removing modular I/O cards, do it carefully as the design is hot - swappable, but still handle with care. Regarding power, it can work with 110VAC to 240VAC, 50/60Hz, so you don't have to worry about different power supplies. However, ensure the power source is stable. For maintenance, keep the device in a clean and dry environment. Wipe the front panel and enclosure regularly. If there are any issues with the connections, check the cables and the pin configurations. Also, make sure to follow the CE and RoHs regulations when disposing of the device.
