myMix MADI-16 16 Channel MADI Interface

The myMix MADI-16 is a top - notch 16 - channel MADI interface. It's perfect when you need to use over 16 channels from a console in MADI format. This package includes one IEX16L - A and the RME ADI - 648 MADI to ADAT interface. You can easily expand the channels. Just add one more IEX16L - A for every additional 16 channels, reaching a maximum of 64 channels. All signals of MADI, ADAT, and the myMix protocol are 24 - bit/48kHz, so there's no loss of audio quality due to sample rate conversion. The myMix system has its own clock, so you don't need an external master clock. Simply connect the MADI cable to the ADI - 648 input and use TOSLINK cables to send signals to the IEX16L - A. If you use multiple IEX16L - As with the ADI - 648, consider using a switch like the Power8 or Multi 8 to combine them and return a single CAT5(6) cable to the main switch.

Using the myMix MADI - 16 is easy. First, connect the MADI cable to the ADI - 648 input. Then, use TOSLINK cables to send the signals to the IEX16L - A. If you want to use more than 16 channels, add one IEX16L - A for every additional 16 channels, but don't go over 64 channels. Since the myMix system has its own clock, you don't need to worry about a master clock. When you're using multiple IEX16L - As with the ADI - 648, use a switch like the Power8 or Multi 8 to simplify the connections. For maintenance, keep the device in a clean and dry place. Avoid exposing it to extreme temperatures and humidity. Regularly check the cables for any signs of wear and tear. If you notice any problems, replace the cables right away to ensure the best audio quality.