The DigitaLinx DL-HDE100 is a sleek black HDMI over Twisted Pair Set. It comes with power, control, and Ethernet features. With this set, you can enjoy HDMI transmission up to 330 feet (100m). It's compatible with 1080p, 4Kx2K (UHD), and 3D, and supports CEC. It has built-in surge protection and diagnostic LEDs. It's HDCP 2.2 compliant and offers bidirectional wideband IR and RS232 pass-through, along with 100-BaseT Ethernet pass-through. The flexible power design allows you to use the power supply at the TX or RX end, and it has a locking power connector. Technical specs include a maximum distance of 100m, a bandwidth of 10.2 Gbps, a gain of 0 dB - 10 dB at 100 MHz, a painted steel enclosure, dimensions of 5.31 x 2.91 x 0.59 in, and a shipping weight of 1.8 lbs.
Using the DigitaLinx DL-HDE100 is easy. First, connect the HDMI cables to your devices at both the TX and RX ends. You can choose to use the power supply at either the TX or RX end according to your needs. Then, plug in the power using the locking power connector. Make sure your devices support 1080p, 4Kx2K (UHD), or 3D for the best experience. When using, avoid placing the set in areas with high humidity or strong electromagnetic interference. For maintenance, keep the set clean and free of dust. You can use a soft, dry cloth to wipe it. If there are any problems, check the diagnostic LEDs for troubleshooting. Don't open the painted steel enclosure by yourself as it may void the warranty.
