Hall Technologies 511-POH-30W PoH Compliant Power Inserter

The Hall Technologies 511-POH-30W is an outstanding PoH-compliant power inserter. It's designed to power one end of an HDBaseT link. As it passes UTP signals, it injects 48v power for the PD. This power supply adheres to the IEEE 802.3af standard and only powers the cable when a compliant device is connected. For instance, if your receiver can't supply power via the UTP cable, you can use this injector to power the UHBX-S-WP wall plate transmitter. Some TVs and projectors with built - in HDBaseT receivers may not send power to the wall plate, and that's where the 511 - POH - 30W shines. Key Features: - Self - contained HDBaseT power injector. - 100 - 240VAC universal input for wide - range use. - Desktop style for easy placement. - IEEE802.3af compliant for standard - based performance. - Load diagnostic LED for quick status checks. - Overload shutdown and short - circuit protection for safety. - Regulated output with low ripple for stable power. - Complies with EMI/RFI regulations and is CE compliant, UL listed. Technical Specifications: - Total Power: 33 W (max at full load). - PoE Power: 30 W. - AC Input Voltage: 100 - 230 VAC. - Output Voltage: 48 - 52 VDC. - Signal Compatibility: PoE Standard (IEEE 802.3af), HDBaseT (PoH for HDBaseT 1.0 Class A, B and 2.0), RJ45 Power (end - span: 1/2, 3/6 spare line pair; mid - span: 4/5, 7/8 data - pair). - Dimensions: 4.61L x 2.01W x 1.30H inches (117L x 51W x 33H mm). - Weight: 0.31 lb (0.14 Kg). - Operating Temp: 0 to 50 C (- 32 to 122 F). - Storage Temp: - 20 to 75 C (- 4 to 167 F). - Compliance: CE mark (commercial), FCC Part 15 Class B, RoHS, WEEE. - MTBF: 100,000 hours (estimated).

Using the Hall Technologies 511 - POH - 30W power inserter is quite straightforward. First, make sure the device you want to power is compliant with the IEEE 802.3af standard. Connect the inserter to a power source within the 100 - 240VAC range. Then, connect it to your HDBaseT link to start injecting power. The load diagnostic LED will show you the status of the device, so keep an eye on it. When using this inserter, always ensure that the device is placed in an area within the operating temperature range of 0 to 50 C. Avoid exposing it to extreme heat or cold. Also, never exceed the maximum power consumption of 33 W at full load. For maintenance, simply keep the device clean and free from dust. If you notice any issues like the LED showing abnormal status or a sudden power failure, check for short - circuits and make sure all connections are secure. If the problem persists, it's best to contact customer support.