Product Description
The Intelix AS-2H-WP-W is a two-gang, Decora-style wall plate, ideal for classrooms, boardrooms, and conference centers. It has two HDMI inputs and uses HDBaseT technology to send digital output up to 70 meters via solid core shielded Category 5e or better cable. This transmitter works well with several Intelix HDBaseT receivers, especially the DIGI-HD60C-R. It features multiple EDID modes to avoid user confusion and incompatible video formats. The unit can be powered from the rear panel or by Power over HDBaseT (PoH), with built-in surge protection and diagnostic LEDs for easy installation. It also has a customizable power management system, going into low power after 30 minutes of no video or 3 hours of inactivity. When using local power, 12V DC is available for other devices. It automatically switches to the active video input and offers additional contact closure inputs for third - party control. RS232 control can be achieved through a compatible receiver or a direct connection. You can program it to control the connected display using Intelix Display Control software. Key features include two HDMI inputs, 70m HDBaseT output, automatic input switching, multiple control options, PoH or local power, display control software, and customizable power management.
Using the Intelix AS - 2H - WP - W is easy. First, connect your devices to the two HDMI inputs. Then, use a solid core shielded Category 5e or better cable to connect the HDBaseT output to your receiver, up to 70 meters away. You can power the unit either from the rear panel or by Power over HDBaseT (PoH). If you're using local power, there's 12V DC available for other devices on the rear power output connections. The unit will automatically detect and switch to the active video input. You can also control it using RS232, auto, or dry contact closure. To control the connected display, use the Intelix Display Control software and enter the display manufacturer's RS232 commands. When it comes to maintenance, keep an eye on the diagnostic LEDs. If there's a surge, the built - in surge protection will help. Remember, the unit has a customizable power management system. By default, it goes into a low - power state after 30 minutes of no video or 3 hours of inactivity. If you want to change this setting, you can customize it according to your needs.
