Product Description
The Nimbus WiMi5300AR H.264 HDMI Decoder is a top - notch device. It offers ultra - low latency of just 20ms, ensuring smooth and real - time performance. With full HD H.264 encoding/decoding and RTSP streaming, it can be used for remote PC control without delay, acting as an IP - KVM extender. Key features include support for H.264 with Baseline Profile level 4.2, an ultra - low latency H.264 engine, and the ability to transport 1080p60 full HD over Ethernet or the Internet. It has an HDMI v1.3 interface, supports various video formats, and has 2 - channel Linear - PCM audio. With a maximum encoding rate of 30Mbps, it's IEEE 802.3af compliant for Power over Ethernet, saving bandwidth costs. It allows for multicasting with unlimited decoders using a single multicast IP address and can be controlled from multiple decoders. Ideal for live streaming, IP KVM extension, and digital signage. Applications range from remote PC use, control rooms, medical imaging to education. Technical specs cover HDMI, network, and audio interfaces, as well as support for DTV and VESA video formats.
Using the Nimbus WiMi5300AR H.264 HDMI Decoder is easy. First, connect the device to your network using a Cat.5e UTP cable. If you want to use Power over Ethernet, make sure your network supports IEEE 802.3af. Then, connect the HDMI cable from your source to the decoder. For audio, connect the appropriate digital audio cables. When using it for remote PC control, follow the on - screen instructions to pair it with your PC. Remember to place the device in a well - ventilated area to avoid overheating. Keep the device clean by gently wiping it with a dry cloth. If you encounter any issues, check the network connection and ensure all cables are properly plugged in. For software - related problems, try restarting the device and your connected devices. Also, keep the device's firmware up - to - date for the best performance.
