Product Description
The Thor Fiber F - GET - TR - SFP Ethernet Transceiver with SFP is a top - notch solution for transporting Gigabit Ethernet ports over fiber from one place to another. These transceivers work in pairs, with one at each end of the link. Any network cable connected to the RJ - 45 port of one unit is seamlessly transferred to the corresponding RJ - 45 port of the other unit. They operate transparently, non - IP addressable, leaving network traffic over the fiber link unchanged. Devices connected via the fiber link seem to be directly connected by a standard network cable. This is ideal for linking switches or other network devices in different buildings or extending an IP network to a distant location. We also offer custom equipment to integrate more signals on a single fiber. Besides Ethernet, it can carry video and audio channels, telephone lines, E1 or T1 links, and even satellite signals over a single fiber. With single - mode fiber, it has a maximum transmission distance of 120 km. It features easy - to - read diagnostic LED lights for continuous monitoring of link status and network speed. Key features include 10/100/1000Base - T to 1000Base - X or 100Base - X flexible fiber SFP media converters, the ability to connect 10/100 devices to Fast Ethernet or 1000 Gigabit backbone, an empty slot for standard Gigabit or Fast Ethernet Fiber SFPs, automatic adjustment to the speed of Gigabit and Fast Ethernet fiber SFPs, connection to 10 Mbps, 100 Mbps or 1000 Mbps copper connections, support for Fast Ethernet and Gigabit speeds using different SFP modules, and compatibility with multimode or single - mode fiber using different SFP modules. Technical specifications cover standards like IEEE 802.3 10BASE - T, IEEE 802.3u 100BASE - TX, etc., full - duplex operating mode, single - mode fiber type, 2 Fiber Port SFP Transceiver (LC/PC) and RJ - 45 Female connection ports, dimensions of 1' <26 mm> x 3.7' <95 mm> x 2.8' <70 mm>, an operating temperature range of 0C to 50C, storage temperature range of - 20C to 70C, operating humidity of 10% to 90% RH, storage humidity of 5% to 90% RH, 110/240V auto - sense internal power, and registrations such as FCC Part 15 Class A, CE, UL, CUL, TUV. The network media can be 62.5/125 microns multimode or single - mode fiber cable, and it has LED indicators for power, fiber port link/act, copper port link/act, and 1000Mbps.
Using this Thor Fiber Ethernet Transceiver is quite straightforward. First, make sure you have a pair of transceivers as they work in pairs. Connect one transceiver to your network device at one end and the other at the destination end. Plug the network cable into the RJ - 45 port of the transceiver. For the fiber connection, use the appropriate SFP module and connect it to the fiber port. When using it, keep in mind the operating temperature should be between 0C and 50C, and the humidity should be within 10% to 90% RH. Avoid exposing it to extreme temperatures or high humidity environments. For storage, keep it in a place where the temperature is between - 20C and 70C and the humidity is 5% to 90% RH. To maintain it, regularly check the LED indicators to monitor the link status and network speed. If you notice any abnormal readings, check the connections first. If the problem persists, contact our customer service. Also, make sure to use the correct power supply as it supports 110/240V auto - sense internal power.
