Blackmagic Design Studio Camera 4K Pro G2 (Used)

The Pre-owned Blackmagic Design Studio Camera 4K Pro G2 shows minimal signs of use. It's designed for powerful SDI switchers, adding professional 12G - SDI and 10G Ethernet connections. This is perfect when the camera is far from a switcher. It has a 12G - SDI output and a 12G - SDI program return input with camera control, talkback, and tally. There's also a powerful HDMI output with control features. The 10G Ethernet connection allows all connections on a single cable for a low - cost SMPTE style workflow. **Technical Specifications** **Camera Features** - Effective Sensor Size: 17.78mm x 10mm (Four Thirds) - Lens Mount: Active MFT Mount - Lens Control: Iris, focus, zoom on supported lenses - Dynamic Range: 13 Stops - Dual Native ISO: 0dB and 18dB gain - Sensitivity at 0dB Gain: f11 with 2160p59.94; f12 with 2160p50 at 2,000 lux with 89.9% reflectance - Signal to Noise Ratio: 63dB for 2160p - Shooting Resolutions: 3840 x 2160 (Ultra HD) up to 60 fps - Frame Rates: 23.98, 24, 25, 29.97, 30, 50, 59.94, and 60 frames per second; off - speed frame rates up to 60 fps in Ultra HD - Focus: Auto focus available using compatible lenses - Screen Dimensions: 7 - inch 1920 x 1200 - Screen Type: LCD capacitive touchscreen - Screen Brightness: 2000 nits - Controls: Touchscreen camera settings and menus with rotary settings dial, program button, F1, F2, and F3 assignable function buttons, brightness contrast, and peaking dials - Mounting Options: 2 x 1/4 - inch tripod mount; 1 x 3/8 - inch tripod mount **Connections** - SDI Video Inputs: 1 - SDI Video Outputs: 1 - SDI Rates: 1.5G, 3G, 6G, 12G - HDMI 2.0 Video Outputs: 1 - Analog Audio Input: 2 x XLR analog switchable between mic and line levels, phantom power support; 1 x 3.5mm Stereo Input, can also be used for Timecode input - Analog Audio Output: 1 x 5 - pin XLR for talkback headset; 1 x 3.5mm TRRS mini jack for headphones with mic - Reference Inputs: Tri - Sync or Black Burst when used with optional Blackmagic Studio Converter - SDI Audio Output: 2 channels of program audio embedded in 1.5G/3G/6G/12G - SDI, 2 talkback channels on 15 and 16 - Remote Control: Remote camera control over SDI, HDMI, or Ethernet - Ethernet: 10Gb/s - Computer Interface: 2 x USB Type - C 3.1 Gen 1 (up to 5Gb/s) expansion ports for external recording and focus / zoom demand connection; software updates using USB - C Port A **Audio** - Microphone: Integrated stereo microphone - Built in Speaker: 1 x mono speaker **Standards** - SD Video Standards: None - HD Video Standards: 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 1080i50, 1080i59.94, 1080i60 - Ultra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60 - SDI Compliance: SMPTE 292M, SMPTE 424M, SMPTE 425M level A and B, SMPTE 2081 - 1, SMPTE 2081 - 10, SMPTE 2082 - 1, and SMPTE 2082 - 10 - SDI Audio Sampling: Television standard sample rate of 48 kHz and 24 - bit **Media** - 2 x USB - C 3.1 Gen 1 expansion ports for external media for recording Blackmagic RAW - Media Format: Can format media to ExFAT (Windows/Mac) or HFS+ (Mac) file systems - Supported Codecs: Blackmagic RAW Constant Bitrate 3:1, 5:1, 8:1, 12:1; Blackmagic RAW Constant Quality Q0, Q1, Q3, Q5 **Storage Features** - Storage Type: 2 x USB - C 3.1 Gen 1 expansion ports for external media - Recording Formats: Blackmagic RAW 3:1, 5:1, 8:1, 12:1, Q0, Q1, Q3, and Q5 in Ultra HD 3840 x 2160 at the selected frame rate - Storage Rates: Based on 30 frames per second. For 3840 x 2160 (Ultra HD), Blackmagic RAW 3:1 - 127 MB/s; 5:1 - 77 MB/s; 8:1 - 48 MB/s; 12:1 - 32 MB/s; Q0 - 96 to 190 MB/s; Q1 - 64 to 153 MB/s; Q3 - 43 to 109 MB/s; Q5 - 26 to 64 MB/s **Control** - External Control: Blackmagic Zoom Demand and Blackmagic Focus Demand for controlling camera and lens from tripod handles; Blackmagic Control Protocol over SDI and HDMI for external control with a compatible ATEM switcher with ATEM Software Control or ATEM Camera Control Panel, including control of some camera settings, focus, iris, and zoom with compatible lenses, color corrector, tally, and record start and stop to external media via USB expansion port - Color Corrector: DaVinci YRGB - Talkback and Tally: 1 x front facing live tally indicator for talent, 1 x rear facing for operator; talkback on SDI Channels 15 and 16 **Software Included**: Blackmagic Camera Setup for Mac and Windows **Operating Systems**: Mac 12.0 Monterey, Mac 13.0 Ventura or later, Windows 10, 64 - bit **Power Requirements** - Power Supply: 1 x External 12V DC 60W power supply - Power Inputs: 1 x 12V DC locking 5.5 mm barrel connector, 1 x 12V DC 4 pin XLR input for external power supply or battery use, 1 x RJ45 Ethernet connector for power from Type 4 PoE power supplies - Power Usage: 26 - 40 W using DC input; 30 - 46 W using PoE input **Physical** - Length: 10.77 in - Width: 6.68 in - Height: 6.59 in - Weight: 3.71 **Environmental Specifications** - Operating Temperature: 0 Degrees to 40 Degrees C (32 Degrees to 104 Degrees F) - Storage Temperature: - 20 Degrees to 45 Degrees C (- 4 Degrees to 113 Degrees F) - Relative Humidity: 0% to 90% non - condensing **What's Included** - Blackmagic Studio Camera 4K Pro G2 - Blackmagic Studio Camera Sun Shade - Tripod Mount compatible with 15mm lightweight rails - Turret Dust Cap - External 12V DC power supply with locking connector and international sockets adapters for most countries **Warranty**: 12 Month Limited Manufacturer's Warranty.

Using the Blackmagic Design Studio Camera 4K Pro G2 is straightforward. First, connect it to your power source. You can use the external 12V DC power supply, or if you have a Type 4 PoE power supply, connect it via the RJ45 Ethernet connector. Once powered on, use the touchscreen and rotary settings dial to adjust camera settings like focus, iris, and zoom. When it comes to audio, connect your microphone to the XLR or 3.5mm inputs. The camera supports phantom power for XLR inputs, so you can use professional microphones. For audio output, you can connect a talkback headset to the 5 - pin XLR or headphones with a mic to the 3.5mm TRRS mini jack. For video connections, use the SDI or HDMI outputs to connect to your switcher or monitor. The 12G - SDI and 10G Ethernet connections are great for long - distance setups. **Note**: Make sure to format your external media (using the USB - C 3.1 Gen 1 expansion ports) to either ExFAT or HFS+ file systems before recording. Also, ensure your operating system is compatible (Mac 12.0 Monterey, Mac 13.0 Ventura or later, Windows 10 64 - bit). **Maintenance**: Keep the camera in a clean and dry environment. The operating temperature should be between 0 and 40 degrees Celsius. When not in use, store it at a temperature between - 20 and 45 degrees Celsius. Use the turret dust cap to protect the lens. Regularly check the connections for any signs of wear and tear. And don't forget to update the software using the USB - C Port A to ensure optimal performance.