SKAARHOJ ETH-TALLY-LINK-V2-x4 Tally Box and 4x Tally Lights Bundle

The SKAARHOJ Tally System is an excellent addition to your live video - production setup. Each tally light has two LEDs. One LED faces the camera operator and offers both program and preview tally, while the larger one faces the presenter and is for program only. There are two switches on the tally light. One allows the operator to turn on or off the main LED, and the other can dim the operator LED. The Tally Box System can manage up to 8 tally lights. You can connect them directly through the box or use a daisy - chain connection from one tally light to another. Key features include compatibility with Blackmagic Design ATEM Production Switchers and vMix via the vMix Bridge Software. The ETH - GPI Link can send GPI signals over ethernet to the Tally Box, which then routes them to the lamps. It also has program + preview tally, star and daisy - chain connections, and has been tested with 200m cables. There are on/off switches for the main LED and dimmed on/off switches for the operator LED. The UniSketch web interface allows for extensive configuration.

Using this SKAARHOJ Tally System is quite easy. First, decide how you want to connect the tally lights - you can either connect them directly to the Tally Box or use the daisy - chain method. If you're using a Blackmagic Design ATEM Production Switcher, it's already compatible. For vMix, install the vMix Bridge Software and connect to vMix via the network. When it comes to the tally lights, the camera operator can control the main LED with the on/off switch and adjust the brightness of their LED using the dimmed on/off switch. As for maintenance, keep the system away from moisture and extreme temperatures. If you need to change the configuration, use the UniSketch web interface. When handling the cables, don't bend them too sharply, especially if you're using long cables like the 200m ones. And always make sure the power supply is stable to avoid any issues with the system.