The Avenview HDM-C6IP-SET is a remarkable HDMI extender set. It can extend your HD display with a resolution of 1080p/60Hz up to 330 feet (100 meters) from your HDMI or DVI-D source. By using the TCP/IP protocol, you can transmit high-definition video over an existing TCP/IP network. Here are three usage examples: A. The Tx and Rx units can extend up to 100 meters via a single CAT5/6 cable in a point-to-point connection. B. Connect the Tx to a router to set up an IP address and send 1080p video signals to multiple Rx units connected to the router and your desired displays. You can connect up to 150 displays with a single Tx. C. Connect the Tx to a router with internet access to establish a DHCP address and send 1080p video signals to the Rx connected to the router and your desired displays. Key features include an embedded Silicon Image chipset for top - notch quality, compatibility, and reliability. It is HDMI 1.3c and HDCP compliant, with EDID 1.1 support. It regenerates the HDMI signal, extends HDMI up to 100m/120m over a single CAT5E/6 cable, supports HDTV resolutions like 1080P/60Hz and Vesa (1920 x 1080), and currently offers point - to - point transmission that can be expanded to multi - point - to - point. It also enables pure, unaltered, and uncompressed 7.1ch digital HDMI transmission over a LAN cable. Technical specifications cover HDMI 1.3 transmitter and receiver, compliance details, video bandwidth using M - JPEG technology over LAN, various video resolutions, HDMI transmission ranges for different resolutions, audio support for surround sound or stereo digital audio, ESD protection, input and output connectors, dimensions, power supply, power consumption, operating and storage temperatures, relative humidity, and what's included in the package: 1 x HDM-C6IP - S, 1 x HDM-C6IP - R, 1 x Power Adapter (+5VDC, 1A), and 1 x User's Manual.
Using the Avenview HDM-C6IP-SET is easy. First, connect the Tx unit to your HDMI or DVI-D source. If you're using the point - to - point connection (Example A), connect the Tx and Rx units with a single CAT5/6 cable. For the multi - display setups (Examples B and C), connect the Tx to a router. Make sure your router has a stable connection, especially if you're using the internet for DHCP addressing. When connecting the Rx units to the router, you can then connect them to your desired displays. Remember to plug in the power adapters for both the Tx and Rx units. They require 2 X DC 5V/1A power supply. Keep in mind that the device operates best at a temperature between 0 - 40°C (32 - 104°F) and should be stored in a place with a temperature range of - 20 - 60°C (- 4 - 140°F). The relative humidity should be between 20 - 90% without condensation. To maintain the device, keep it clean and free from dust. Avoid exposing it to direct sunlight or extreme temperatures. If you have any issues, refer to the user's manual that comes with the package.
