Intelix AS-1H1DP HDMI/DisplayPort Auto-Switcher with HDMI and HDBaseT Output

The Intelix AS-1H1DP is an under - table switcher ideal for classrooms, boardrooms, and conference centers. It offers DisplayPort + Audio to HDMI conversion and an HDMI input. When the DisplayPort lacks embedded audio, access the analog audio input via RS232. Using HDBaseT tech, it can extend digital output up to 70 meters with suitable cables. Compatible with multiple Intelix HDBaseT receivers, especially the DIGI - HD60C - R. It has multiple EDID modes to avoid user confusion and handle incompatible video. An HDMI output is there for local displays. It can be powered from the rear panel or PoH, and can also power compatible receivers. Built - in surge protection and diagnostic LEDs make installations easy. A customizable power management system puts it in low - power after 30 minutes of no video or 3 hours of inactivity. It automatically switches to the active video input and has additional contact closure inputs for third - party control. RS232 control is possible via a compatible receiver or direct connection. You can program it to control the connected display using Intelix Display Control software, which automates display power and input based on video activity. Key features include HDMI and DisplayPort inputs with 3.5mm stereo, HDMI and HDBaseT outputs up to 70m, automatic input switching, multiple control methods, flexible power options, display control software, and customizable power management.

Using the Intelix AS - 1H1DP is easy. First, connect your devices to the HDMI and DisplayPort inputs with the 3.5mm stereo audio if needed. For the output, you can use the HDMI for a local display or HDBaseT to send the signal up to 70 meters away. Make sure to use a solid - core shielded Category 5e or better cable for HDBaseT. You can power it from the rear panel or through Power over HDBaseT. When using RS232 control, connect it to a compatible receiver like the DIGI - HD60C - R or directly to the device's RS232 input. To control the connected display, use the Intelix Display Control software and enter the display manufacturer's RS232 commands. As for maintenance, keep it in a dry and clean place. Check the diagnostic LEDs regularly to ensure it's working properly. In case of a power surge, the built - in protection should keep it safe. If you don't use it for a while, the power management system will put it in a low - power state, but you can customize this setting according to your needs.