MuxLab 500752-TX HDMI over IP Encoder

The MuxLab 500752-TX HDMI over IP Encoder is a game - changer for AV setups. It enables you to connect an HDMI source through any Ethernet LAN. No need to install a dedicated cabling system, making it easy to set up and change AV broadcasts. This encoder transforms an HDMI bitstream into IP, which can be sent over an Ethernet LAN. The corresponding decoder then converts the IP packets back to the original HDMI bitstream for display on an HDMI device. The MUX - 500752 - TX is a transmitter. You'll need a MUX - 500752 - RX to complete the system, or you can buy the MUX - 500752 as a full kit. This device supports PoE (PD) and is designed to be powered by a PoE (PSE) Ethernet Switch. If you don't have one, you can purchase the power supply (500992) separately. Key features include extending 1080P HDMI signals up to 330ft (100m), supporting up to 16 transmitters and 200 receivers, multicasting and broadcasting, PoE support, IR control, and HDCP compliance.

Using the MuxLab 500752 - TX HDMI over IP Encoder is easy. First, connect your HDMI source to the encoder. Then, link the encoder to an Ethernet LAN. If you're using a PoE (PSE) Ethernet Switch, it will power the device. Otherwise, you'll need to buy the power supply (500992) separately. To complete the system, connect a MUX - 500752 - RX decoder to your HDMI display. You can have up to 16 transmitters and 200 receivers working together. When using it, make sure your network can handle the data transmission for the best performance. As for maintenance, keep the device in a clean and dry place. Check the connections regularly to ensure they are secure. If you face any issues, refer to the user manual or contact customer support.