The Apantac SDI Distribution Amplifier is a top - notch device crafted to boost the flexibility and efficiency of your broadcasting or production setup. As a triple - rate 1 x 8 SDI unit, it can distribute a single input signal to up to eight output devices at the same time. Its Passive Loop - Output feature is a real game - changer, allowing signal distribution without sacrificing quality or strength. This makes it perfect for applications that need consistent, high - quality video distribution, enhancing both reliability and efficiency. This amplifier combines sophistication, functionality, and premium performance, offering an excellent solution for your audio - visual distribution needs.
Key Features:
- It comes in an openGear 3.0 card - based form factor.
- Features a 1 x 8 triple - rate reclocking SDI configuration with passive loop - out.
- You can access the reclocker via the openGear Dashboard.
- Complies with SMPTE 424M/292M/344M/259M standards.
- Supports data rates from 125 Mbps to 2.97 Gbps.
- Maintains a signal level at 800mVP - P±10%.
- Offers equalization up to 120m at 2.97 Gbps, 140m at 1.485 Gbps, or 400m at 270 Mbps on Belden 1694A.
- Supports DVB - ASI at 270 Mbps for output 1, 3, 5, and 7.
Using this Apantac SDI Distribution Amplifier is quite straightforward. First, connect your single input signal to the appropriate input port of the amplifier. Then, you can connect up to eight output devices to the corresponding output ports. You can access the reclocker through the openGear Dashboard if needed. When using it, make sure your input signal's data rate is within the supported range of 125 Mbps to 2.97 Gbps. Also, note that the equalization distances vary according to different data rates. For maintenance, keep the amplifier in a clean and dry environment. Avoid exposing it to extreme temperatures or humidity. If there are any issues, check the connections first and refer to the user manual for further troubleshooting.
