Product Description
The Hall Technologies U2-DR1 is an amazing USB extender that uses a CAT6 cable to extend a host PC's USB 2.0 port up to 150 meters (500 ft) at data rates of up to 480 Mb/s. The local side draws power from the PC, while the remote side is powered by an included universal power supply. It's compatible with all PCs and Macs and doesn't need any driver installation. This extender works transparently without hidden hubs, ensuring maximum compatibility with all USB devices. It's an ideal choice for corporate, education, industrial, and commercial settings. Key features include extending high-speed USB to 150 meters, being plug - n - play, supporting a wide range of USB devices like webcams, flash memory, touch screens, printers, and scanners, and coming with a universal power supply. Technical specs: Standard - USB; Supported Systems - Microsoft Windows, Mac OS, Linux; Max Data Rate - 480 Mbps; Max Cable Distance - 150m / 500 ft; UTP Cable Type - CAT5e/CAT6; Operating Temperature - 32 to 122 F (0 to 50 C); Operating Humidity - 20% - 80% RH; Housing Material - Metal; Ends Dimensions - 2.5 x 1.3 x 0.9 inch (65 x 35 x 25 mm); Shipping Dimensions - 8.5 x 7.5 x 2.5 inch (21.6 x 19 x 6.5 cm); Weight of each end - 0.2 lbs (90g); Shipping Weight - 1.2 lbs (550g).
Using the Hall Technologies U2 - DR1 USB extender is super easy. First, connect the local end to your PC's USB 2.0 port. The local end will get power from the PC automatically. Then, use a CAT5e or CAT6 cable to connect the local end to the remote end. The remote end is powered by the included universal power supply, so plug it in. After that, you can connect your USB devices like webcams, printers, or scanners to the remote end. There's no need to install any drivers; just plug and play. When using it, make sure the operating temperature is between 32 and 122 F (0 to 50 C) and the humidity is between 20% - 80% RH. To maintain it, keep it in a clean and dry place. Avoid exposing it to extreme temperatures or moisture. If you're not using it for a long time, unplug it from the power source and store it properly.
