Kramer VM-80VN 1:8 Video Distributor

The Kramer VM - 80VN is an outstanding high - performance video distributor. It's designed to handle composite or SDI signals effectively. This distributor can also be set up as a 1:4 distribution amplifier for s - Video (Y/C) signals. It comes with useful controls to counteract signal losses that often occur with long cable runs. Key Features: - High - Bandwidth of 330MHz (-3dB), ensuring smooth signal transmission. - Level (Gain) and EQ (Peaking) controls for fine - tuning the signal. - Dual - Mode operation, allowing you to configure it as either a 1:8 (composite) or 1:4 (s - Video) DA. - Internally selectable Video AC/DC Coupling. - It's a companion unit to the VM - 80A Audio DA. Technical Specifications: - INPUTS: 2 composite/SD - SDI video, 1Vpp/75ohms on BNC connectors with termination switches. - OUTPUTS: 2x4 composite/SD - SDI video, 1Vpp/75ohms on BNC connectors. - MAX. OUTPUT: 2Vpp. - VIDEO BANDWIDTH (-3DB): 330MHz. - DIFF. GAIN: 0.12%. - DIFF. PHASE: 0.5Deg. - K - FACTOR: <0.05%. - S/N RATIO: 74dB. - CONTROL: 75ohms termination switch, 1:8 or 2x1:4 selector switch. - NON - LINEARITY: 0.1%. - COUPLING: DC or AC (internal selection). - POWER CONSUMPTION: 12V DC, 50mA. - INCLUDED ACCESSORIES: Power cord. - PRODUCT DIMENSIONS: 21.46cm x 16.30cm x 4.36cm (8.45' x 6.42' x 1.72' ) W, D, H. - PRODUCT WEIGHT: 1.0kg (2.1lbs) approx. - SHIPPING DIMENSIONS: 35.10cm x 21.20cm x 7.20cm (13.82' x 8.35' x 2.83' ) W, D, H. - SHIPPING WEIGHT: 1.4kg (3.0lbs) approx.

Using the Kramer VM - 80VN is easy. First, connect your video source to the appropriate input on the device. You can choose between composite or SD - SDI video inputs. The device has termination switches on the BNC connectors for inputs, so make sure to set them correctly. For the output, connect your displays or other devices to the 2x4 composite/SD - SDI video outputs. You can configure the unit as a 1:8 DA for composite signals or a 1:4 DA for s - Video signals using the selector switch. When it comes to power, just plug in the included power cord and connect it to a 12V DC power source. The power consumption is quite low at 50mA. Some important notes: Don't expose the device to extreme temperatures or humidity. Keep it in a clean and dry place. Also, make sure the cable connections are secure to avoid signal issues. For maintenance, you can use a soft, dry cloth to clean the exterior of the device. If you notice any problems with the signal, you can use the Level (Gain) and EQ (Peaking) controls to adjust the signal. And remember, the Video AC/DC Coupling can be selected internally according to your needs.