Product Description
The Magewell Pro Convert HDMI TX is a cutting - edge video converter that revolutionizes live streaming and broadcasting. It effortlessly transforms HD HDMI video signals into NDI format, enabling high - quality video transmission over standard Ethernet networks. With minimal latency and exceptional clarity, it's perfect for live events and remote productions. This device integrates seamlessly with various streaming apps and video management systems, supporting a wide range of resolutions and frame rates to meet diverse needs. Its user - friendly interface makes setup and operation a breeze, and its compact design allows for flexible placement in any studio or field. In the NDI conversion market, it stands out as a leader, simplifying the broadcasting process and enhancing video stream quality. With stunning detail and vibrant colors, it brings your content to life.
Key Features:
- Converts HDMI to Full NDI for high - quality streaming.
- Supports up to 1080p at 60 frames per second.
- Low latency for real - time video.
- Easy setup and operation.
- Compact design for easy integration.
- Compatible with a wide range of streaming software and hardware.
- PTZ camera control with multiple protocols.
Technical Specifications:
Dimensions: 4.72' x 3.54' x 1.06'
Weight: 0.66 lbs
Power Consumption: 5V max current: ~1.5A, Max power consumption: ~6W
Input Ports: 1 x HDMI Type A
Output Ports: 1 x RJ45
Supported Resolutions: Up to 1920 x 1080
Max Video Input: 2048 x 1200 at 60fps 4:4:4/4:2:2
Video Formats: RGB, YUV BT.601/709/2020
Video Formats for NDI Encoding: Full NDI real - time stream at up to 2048 x 1200 at 60fps 4:2:2 8 - bit
Output Resolutions: Same as input or custom: 2048x1080p, 1920x1080p (various frame rates), 1280x720p (various frame rates), 720x480p/i (various frame rates), 720x576p/i (various frame rates)
Input Features: Custom EDID for input port, 8 - channel HDMI - embedded audio, HDMI 1.4, DVI - D
Encoding Features: 2 - channel NDI - embedded audio, Supports NDI 5.x
Configuration Management: Remote control via WebUI, register with Control Hub, real - time device and signal information, configuration options including deinterlacing, EDID, scaling, frame rate, aspect ratio, and firmware updates
Network Interfaces: 10/100/1000Mbps Ethernet, IEEE 802.3af PoE
USB Interface: USB2.0 Type B, 5V/2.1A power supply, USB RNDIS/ECM
Supported Products: NDI Studio Monitor, OBS, vMix, any other NDI - enabled product
LED Indicators: Status LEDs for power supply (on/off) and input signal (locked/unlocked)
Form Factor: 3.96' (L) x 2.37' (W) x 0.92' (H)
Accessories: USB 2.0 A to B cable, 5V/2.1A power adaptor, Mini - DIN 8 breakout cable, Tally light, L - bracket, Screw Mounting Hole, ¼–20 threaded hole
Working Environment: Operating temperature: 32 to 104 deg F, Storage temperature: –4 to 158 deg F, Relative humidity: 5% to 90% non - condensing
Using the Magewell Pro Convert HDMI TX is easy. First, connect your HD HDMI video source to the HDMI Type A input port on the converter. Then, connect the converter to your network using the RJ45 output port. You can power it up using the provided 5V/2.1A power adaptor or via the USB2.0 Type B port. Once it's powered on, the status LEDs will show the power supply and input signal status. You can control and configure the device through the WebUI. You can also register it with the Control Hub for more advanced management.
When using it, make sure your network has a stable connection, as a poor network can affect the video quality. Also, keep the device in a well - ventilated area to prevent overheating. The operating temperature should be between 32 and 104 degrees Fahrenheit.
For maintenance, you don't need to do much. Just keep the device clean. You can use a soft, dry cloth to wipe it. Periodically, check for firmware updates through the WebUI and install them to ensure the device runs smoothly and has the latest features.
