Intelix AS-1H1V HDMI/VGA Auto-Switcher with VGA Scaling, HDMI and HDBaseT Output

The Intelix AS-1H1V is an under - table switcher ideal for classrooms, boardrooms, and conference centers. It serves as the main PC interface. This device can convert VGA + Audio to HDMI with VGA scaling up to 1920x1200 and has an HDMI input. Using HDBaseT technology, it can extend the digital output up to 70 meters via solid - core shielded Category 5e or better cable. It works well with several Intelix HDBaseT receivers, especially the DIGI - HD60C - R. With multiple EDID modes, it avoids user confusion and incompatible video formats. There's an HDMI output for local displays. The AS - 1H1V can be powered from the rear panel or by Power over HDBaseT (PoH), and it can also power compatible HDBaseT receivers. Built - in surge protection and diagnostic LEDs make installations easy and reliable. It has a customizable power management system that puts the unit in low - power after 30 minutes of no video or 3 hours of inactivity. It automatically detects the active video input and switches to it, and the 'last in' is selected if both inputs are active. It has contact closure inputs for third - party control and can be controlled via RS232. You can program it to control the connected display using Intelix Display Control software, which can automate display power and input based on video activity. Key features include HDMI and VGA/3.5mm Stereo input, HDMI and HDBaseT output up to 70m, automatic input switching, VGA scaling, multiple control methods, PoH or 24V DC local power, display control software, and customizable power management.

Using the Intelix AS - 1H1V is easy. First, connect your VGA or HDMI sources to the corresponding inputs on the device. If you want to extend the output, use a solid - core shielded Category 5e or better cable for HDBaseT output up to 70 meters. For local display, use the HDMI output. Power the device either from the rear panel or by Power over HDBaseT. The device will automatically detect the active video input and switch to it. If you want third - party control, use the contact closure inputs on the rear. To control it via RS232, connect it to a compatible receiver or the RS232 input of the device directly. You can use the Intelix Display Control software to program the device to control your connected display. When not in use, the device will enter a low - power state after 30 minutes of no video or 3 hours of inactivity. Make sure to keep the device in a dry and cool place. Avoid exposing it to strong magnetic fields or extreme temperatures. Check the diagnostic LEDs regularly to ensure it's working properly. If there are any issues, refer to the user manual or contact customer support.